Lay Conduit and Pull Wires

What happens here

With the trenches dug and conduit routes established, carefully lay the electrical conduit into the trenches. Ensure all sections of conduit are properly joined using appropriate fittings and electrical glue/primer to create a continuous, watertight system. Once the conduit is laid, use a fish tape to pull the correct gauge and type of electrical wire through the entire conduit system. For outdoor burial in conduit, THHN/THWN individual wires are commonly used. Alternatively, if direct burial is permitted by local code and the conduit is protective, UF-B (Underground Feeder with Ground) cable might be used, although pulling individual wires through conduit is generally preferred for future maintenance. Leave sufficient wire length at each end (outlet boxes and termination points) for making connections.

Goal: Install conduit in trenches and pull electrical wires through the system.