Initiate Forced Regeneration (First Attempt)

What happens here

Locate the regeneration (regen) button on the tractor's dashboard. Ensure the throttle is set to idle. Press and hold the regen button for approximately 2.5 seconds to initiate a forced regeneration cycle. The engine should automatically rev up to a higher RPM (around 2350-2650 RPM) and maintain it for about 20 minutes as the system attempts to clear accumulated soot from the DPF (Diesel Particulate Filter). Monitor the warning lights during this process.

Goal: Attempt to clear the DPF and emissions system by performing a forced regeneration.