Skip to main content

Attaching and Adjusting SprayGuide to Airless Sprayer

3:36
26:24
56.9K views

At 3:36 in

Titan Spray Guide Review. Is This A Terrible Painting Tools?

What happens here

The presenter outlines the proper setup for the Titan SprayGuide with an airless sprayer. This involves attaching the assembled spray guide to a sprayer extension and carefully selecting the correct spray tip. For flat interior or exterior surfaces, he recommends using 411, 511, or 513 tips, while for rough surfaces like stucco, a 615 tip is suggested. He clarifies that the spray pattern comes out from the tip and is intended to be directed against the plastic disc when working on a 90-degree angle or corner, with the disc preventing paint from hitting the adjacent surface. He warns that using a tip that is too wide will result in excessive overspray. The setup allows for adjusting the distance of the disc from the tip by moving it along the extension, adapting to different spray patterns.

Goal: Properly connect the SprayGuide to an airless sprayer for optimal performance.

Tools and materials

  • Airless Spray Tip — To define the spray pattern and flow rate
  • Airless Sprayer Extension — Extending the reach of the sprayer and attaching the guide
  • Titan SprayGuide — The complete guiding tool to be attached

What they say

Hide

easy to use all right so this device here's the device right here and you can see this is going to just attach to my spray extension right here and it can adjust forward and back you can use different tips with it now tighten on the package it recommends using um it says it works best when using a 411 511 or 513 tip for flat interior or exterior surfaces for rough surfaces like stucco it says it recommends using a 615 tip so i definitely would stay within those recommendations because that width pattern if you get something too wide it's going to throw throw way too much overspray you know on this disc right here and so this disc is just going to run along your 90 degree angle as you're spraying and theoretically you know eliminates the need for masking or cutting in because the over spray is going to hit this it's not going to go on the other side and so we'll see whether that works now the setup setting this up it's pretty simple easy to set up out of the package it comes with a standard titan um guard right here this is the standard titan guard that comes with all their tips right here so it will hold you know any one of their tips ata tips production tips and the like and i'll hold actually other tips so you can use it doesn't have to be a titan tip you can use um bedford tips you can use tri-tech tips you can use graco rack five tips in this device right here so very simple easy to set up now i'm going to say when i was out in the field using it when i was i was spraying a garage and trying to do cut-ins with the garage trying to get it set up and get the spray

Auto-generated from the video audio.