Sprayer Assembly and Lube Demonstration

on there then you don't have to worry about it all right we're getting ready to take our timing 440 out to test it out and see how it functions we got to set it up first real quick if you've never set up a sprayer really simple um it's going to come with a 50 foot hose right here you're gonna have to have something to cut this make sure you don't cut your hose you don't need any special um fittings at all there's some warning labels and stuff I think you're supposed to leave those warning labels on the hose but they're just going to get in the way there's always going to be something usually that is on the end of the hose that just has to be unscrewed so you can screw this into your sprayer another just little device that has to be removed there nylon cover put this on this is a wrench tight so I'm going to just tighten it with the wrench you don't want to over tighten it it's going to Snug this up not too tight just like that now other end of the hose 50 foot hose my gun is going to attach to that I'll just set these little bands aside all this other stuff aside get it out of the way take off this other green and take out the cap to your gun here this removes this is going to screw onto your gun just like this you're going to need a second wrench to tighten this now what I would highly recommend you doing it doesn't come with a hose whip I would never run my gun attached straight to the hose right here it's extremely stiff not very flexible it's going to cause a lot of fatigue when spraying if you're going to be spraying for long periods of time add a hose in it if you don't know what a hose whip is just get online check it out but you've got to have a hose whip on every single spare here run then so I do like a three foot X Flex web so I'm going to tighten this up again this is not overly tight just going to Snug it up two wrenches is what you're going to need two classic wrenches now is attached another thing I want to check out I'm going to take off my guard right here one thing I want to make sure because this has happened to me before once again by experience paint shop everywhere all over the job site make sure there's a seat inside your gun that way paint's not going to shoot all over out the sides of your guard the seat is in there it's a little white nylon seed put that back on your guard is hand tight do not tighten this with a wrench if you do tighten it with a wrench you'll always have to tighten it with a wrench just hand tight make sure it's…