Cut Drawer Components

What happens here

Plywood is cut for three drawers. The drawer sides are cut to 5 inches tall, and the bottoms are cut from 3/4 inch plywood to prevent sagging under heavy loads. The front panels of the drawers feature a decorative finger pull cutout. Initially, a band saw was considered for the cutout, but a jigsaw is used instead for this detail. Precise measurements are taken to ensure the drawers fit correctly within the cabinet, allowing for the drawer slides and a small reveal.

Goal: Plywood is cut into precise pieces for the drawer sides, fronts, backs, and bottoms, with a decorative finger pull cutout on the front panel.