This man knows his tool. #tools #handtools #electrical #shorts

Gary, what are we looking at with this now, Stan? This is a self- adjusting wire stripper. There's no die holes, no adjustments at all. It automatically adjusts 10 to 26 gauge. Maybe you got real small wires, LED wires, alarm wires. This did them four at a time without nicking strands at all. Cutters right here if you need to cut the wires off. Now, if you want to splice in the middle of a wire or you want to tie right into it, just pass a jaw right over the wire where you want to splice in. It opens up nice and clean in the wire. Now, if you got a trailer light repair, this blow right over that wire. Boom. You got them both at the same time without nicking strands again. Now, if you're in a tight spot, maybe you're under a dash or working down in the compartment where you got a short wire. Uh most strippers wouldn't fit down in there, you can know our tool in those really tight, awkward spots. That quick and easy. Now, if you're doing connectors where you need the same amount stripped every time, we do have a stop right here. And there's inches on one side, millimeters on the other. Just adjust that stuff for the length of strip you need. Put the wire to hit that stop and boom, you got that exact amount for each one of your connectors every time. And you are a veteranowned company. A veteran owned company. You bet, Stan. Thank you very much. Thank you, sir. I guarantee you're not going to be able