Skip to main content
Stesso

Filling and Activating the Water Tank

0:06
0:56
30.9K views

At 0:06 in

This Japanese Drill Bit Is Different! #tools #drilling #diy #powertools

Watch on YouTube

What happens here

This step details how to prepare the AquaShot's integrated water cooling system. The orange water tank features a fill hole located on its back. To access the reservoir for filling, a specific part of the attachment needs to be pulled back until it audibly locks into place, which opens the tank. The system comes with a dedicated water bottle designed for easy and precise filling. To fill the tank, one must locate and push a small flat valve on the tank's top, then squeeze water from the provided bottle into the reservoir until it is adequately filled. After filling, a safety mechanism on the tool is disengaged, indicating that the tool is now armed and ready for use.

Goal: Ensure the AquaShot's water tank is properly filled and the tool is ready for drilling.

Tools and materials

  • AquaShot Drilling Attachment AquaShot — Holding and dispensing water for cooling the drill bit
  • Water Bottle — Conveniently filling the AquaShot's water tank
  • Water N/A — Cooling the drill bit during operation

What they say

Hide

I'm in bed for drilling into tile, glass, porcelain, stone, any real hard surface that'll burn up your bits. This orange part is a water tank. It has a fill hole on the back here. Pull that back at a lock in place. It opens the reservoir. Oh, interesting. Comes with a water bottle. There's a little flat valve here. You kind of push it in, fill it up with water. Turn the safety off. Now you're armed and ready to go. Okay, now it is a flat tip. So you'll want to use a positioning guide or a jig or something, or start in an angle like this.

Auto-generated from the video audio.