Skip to main content
Stesso

Trace Main Feed and Identify Mis-wired Connections

0:28
1:01
12.9K views

At 0:28 in

This is why you don’t hire a Handyman, call an Electrician #electrican #bluecollar

Watch on YouTube

What happens here

Locate the main 'feed' wires coming into the subpanel, often originating from a larger main disconnect (like the '40 AMP DISCONNECT' shown in the video). Then, trace the connections of the 'hot' wires (typically black or red, though could be other colors) and the neutral/ground wires (typically white and bare copper/green). The video reveals a critical error where a 'Hot from the feed is going to the neutrals and the other hot is going to the ground.' This is an extremely dangerous and incorrect wiring configuration that can energize metal components, cause electric shock, and lead to fire. Carefully observe where these primary wires are terminated.

Goal: Detect severely incorrect wiring of hot, neutral, and ground conductors.

Tools and materials

  • 40 AMP Disconnect — The main incoming power source to the subpanel
  • Electrical Subpanel — The component being inspected
  • Electrical Wires — The conductors being traced (hot, neutral, ground)
  • Flashlight — Improving visibility of wiring
  • Non-contact Voltage Tester — Confirming live wires while tracing, if deemed safe

What they say

Hide

this what the this is the feed this is the feed but look okay look where it's going the one hot from the feed is going to the neutrals and the other Hots going over there in the ground bro it's going to that screw right

Auto-generated from the video audio.