These Bits Drill It All! #construction #repair #diy

These are our multi-purpose bits. A variety of different things they'll drill. Now, the reason that can do that, the tips are made out of an alloy of nickel, carbon, titanium, and cobalt. That gives you an edge that's hard without being brittle. And then the shanks are made out of an alloy of chrome and vanadium and tool steel. They're a lot less likely to break. Follow the speed instructions as best you can. For something like iron or concrete, you want to go wide open. And notice what happens when [screaming] we come through the back side there. Nice and clean, no burr. Turn around with that same bit, pop it into hammer mode. No problem whatsoever. If you want to drill something like tile, slow it down. It's also recommended to use water. I don't have any water handy right now, so I'm drilling it dry, but you should use water. If you want to drill something like stainless, hit it with a little spray lubricant, and you're going to kind of go medium speed. And if you ever do wear out the bit, get it back to us, we'll swap you out. We're based in Nashville, Tennessee. millnertools.com. Use fixit20 as a promo code at the end. You'll save 20%.