Skip to main content
Stesso

Install Pressure Gauge

0:53
1:11
904 views

At 0:53 in

There is about to be sand in places sand shouldn't be... #autobodywork #tools @harborfreight

Watch on YouTube

What happens here

Prepare the pressure gauge for installation. Take the roll of Teflon tape and wrap it clockwise around the threaded portion of the pressure gauge. This helps create a better seal and prevents air leaks. Once the tape is applied, carefully screw the pressure gauge into its designated port on the sandblaster unit. Hand-tighten it firmly, but avoid overtightening, which could damage the gauge or the port.

Goal: Mount the pressure gauge for monitoring air pressure

Tools and materials

  • Pressure Gauge Central Machinery — Displaying the internal air pressure of the sandblaster
  • Teflon Tape — Sealing the threads of the pressure gauge to prevent air leaks

What they say

Hide

pliers for this thing. Wheel. Cut these off. This end. Grab the worst flat tip that you have. I really like putting hose clamps where I'm going to get [ __ ] Thread tape in your left hand. Go clockwise. This thing was a kind of a pain to put together, but I'm going to try it on the truck cab and I'll let you guys know how it works. Stay tuned for further

Auto-generated from the video audio.