Install the Paver Layout
At 0:03 in
The river patio 🏞️ #hardscaping
What happens here
After the aggregate base is firmly compacted, a uniform layer of bedding sand (often screed sand or concrete sand) is spread over the entire area. This sand layer is crucial for providing a smooth, precise surface for the pavers and allows for slight adjustments. The pavers are then carefully laid according to the chosen pattern. The video visually demonstrates a complex design featuring a curving central path made of dark gray pavers, bordered by lighter gray and tan pavers for the main patio area and edging. This step requires meticulous placement to maintain consistent joint lines, ensure the pattern flows correctly (especially for curved sections), and involves cutting pavers to fit edges, borders, and intricate curves. A rubber mallet is typically used to gently tap pavers into place.
Goal: Lay the pavers in the desired pattern on the prepared base.
Tools and materials
- Gloves — Protecting hands during paver installation and cutting
- Paver Cutters — Cutting pavers to size, especially for edges, borders, and curved sections
- Rubber Mallet — Gently tapping pavers into the bedding sand for a snug fit
- Safety Glasses — Protecting eyes from debris during paver cutting and installation
- Screed Board — Leveling the bedding sand to a uniform thickness
- Bedding Sand — Creating a level and smooth layer for pavers to rest on
- Dark Gray Pavers — Forming the central winding path of the walkway
- Light Gray/Tan Pavers — Creating the surrounding patio area and borders