Prepare Vehicle Surface
0:00
0:26
720 views
At 0:00 in
THE MAV. #fordmaverick #ford
What happens here
Before applying any vinyl, thoroughly clean the entire surface of the Ford Maverick truck. Use automotive-specific soap and water to wash away dirt, grime, and road film. After rinsing, use a clay bar kit to remove embedded contaminants like tar, tree sap, and industrial fallout, which are not removed by washing alone. Finally, wipe down all application areas with isopropyl alcohol (IPA) diluted with water (e.g., 70% IPA, 30% water) and a clean microfiber towel. This ensures a perfectly clean, smooth, and oil-free surface for optimal vinyl adhesion. Allow the surface to dry completely before proceeding.
Goal: Clean and decontaminate the truck's exterior for vinyl application
Tools and materials
- Automotive Soap Meguiar's — Washing the truck's exterior
- Buckets — Holding soapy water and rinse water (two-bucket wash method)
- Clay Bar Kit Mothers — Removing embedded contaminants from the paint surface
- Isopropyl Alcohol — Degreasing the surface before vinyl application
- Microfiber Towels The Rag Company — Drying and wiping surfaces
- Spray Bottle Generic — Diluting and applying IPA solution
- Wash Mitt Griot's Garage — Applying soap and scrubbing the vehicle