Skip to main content

Clean and Demonstrate Protection

0:21
0:42
72.5K views

At 0:21 in

That Worked Fast. #chrome #aluminium #plastic #polish #truck #boat #car #diy

What happens here

After the buffing process is complete, the polished area of the diamond plate aluminum is wiped clean with a soft cloth to remove any remaining polish residue. The result is a highly reflective, mirror-like finish on the aluminum. To effectively demonstrate the corrosion protection and hydrophobic qualities of the polish, a small amount of moisture (likely water from a spray bottle) is applied to the freshly polished surface. The water beads up and rolls off, indicating that a protective, water-repellent layer has been formed, which helps prevent future corrosion and tarnishing.

Goal: Reveal polished finish and showcase protective properties

Tools and materials

  • Diamond Plate Aluminum Sample N/A — The polished and protected item
  • Soft Cloth — Wiping off polish residue to reveal the shine
  • Spray Bottle — Applying water to demonstrate the polish's hydrophobic protection
  • Water Tap water — Demonstrating the water-repellent properties of the polish

What they say

Hide

smoosh it around and then start giving speed to it. Take your time and once you do with the drill or air tool your aluminum will come out like a mirror. When moisture hits it like this water gets on top it protects it between 4 and 5 months. Check us out on fiberglass paint restoration and also plastic windows or plastic

Auto-generated from the video audio.