That 2nd Tool was Insane. #tools #witchcraft #magic #diy #contractor #construction #shorts

Frank, what are we looking at with this one now? >> This is our flat cable stripper. It's a tool benefited in Germany, you know. We are German company since 50 on the market, third generation, and we only produce quality stripping tools. That is a flat cable stripper, which is perfect, for example, to strip Romex cable. I have the cable here. You can go into the tool, and you can strip as long as you want because there's no throat inside the tool. So, if you want to strip it, you just go into the tool, squeeze the tool, and the outside is stripped. Then you take the paper away in this case. There's the inside core. And now is the nice thing. I go again into the tool and push it, and it's again stripped. And there's a little hole inside the tool, so I can go into the hole, bend the cable, and it's ready for connection. Very fast, very easy. Additionally, we have some really nice other tools. This tool, for example, is the PC Cat. This tool is very great for stripping network cables, anything you have like Cat 5, Cat 6e, and so on. Great tool for it. You open it here on the back. Just take it like that. Place the This is the Cat 5 cable. Place the cable inside. Make a left and a right turn. Open it shortly. Bend the cable. The insulation is breaking. You pull it, and the strip is done. You never touch the inside cores. Very safe. Really great tool. Saves time like hell. And then, finally, I want to show you our really nice tool. It's my most loved tool, to be honest. It's the Secura 2K, a tool which is full automatic wire stripping of single cores, starting on 24 to 10 gauge. The great thing a lot of people don't know, you do not have to adjust anything. The tool is so great. I can show you. You just can cut here on the on the top. Then you place the cable in the front. There's a double V knife inside. I just pull, and the cable is stripped. I didn't nick the inside cores. And so that you trust me, there's the cable I stripped before. It's a Cat 5 cable. It's very tough insulation, and it's a PVC insulation. Let me get it open. Here it is. It's a 24 wire gauge and I set 10 to 24. You you place it just into the tool like like I did it before. Pull it and it's stripped and I never touch the inside cores. It's really safe. You're very very fast and great tool for you. Where do you guys find these at? You find them wherever you buy tools. Amazon, Automation Direct and whatever. We have them stored in Chicago. They're in the country. We are ready to deliver for you. >> Thank you, sir. >> You're welcome.