Skip to main content
Stesso

Demonstrate Non-Contact Voltage Tester Usage

0:00
0:27
1K views

At 0:00 in

⚡ Test Any Outlet FAST! Voltage Tester Pro Hack 🛠️ #tools #tools4life #edc #electrical

Watch on YouTube

What happens here

The video demonstrates the use of a non-contact voltage tester (NCVT) to safely check electrical wires for live voltage. The tester, specifically a Klein Tools NCVT, is shown. When the tester's tip is brought near a live electrical wire, it illuminates red and typically emits an audible beep, indicating the presence of voltage. Conversely, when the wire is not live (power is off), the tester illuminates green, signifying no voltage. The demonstration includes an example where a live wire is tested (indicated by a red light from the tester), then the power is intentionally cut (presumably at a circuit breaker), and the wire is re-tested (indicated by a green light). Finally, power is restored, and the wire is tested again (indicated by a red light), confirming the tester's functionality and the safe practice of verifying power status before handling electrical wires.

Goal: Understand how to safely detect live wires using an NCVT.

Tools and materials

  • Electrical Box — A standard electrical box, likely for an outlet or switch, where the wires are present
  • Electrical Wires — The conductors being tested for voltage
  • Non-Contact Voltage Tester — Detecting the presence or absence of AC voltage in electrical wires without physical contact

What they say

Hide

So tool number three that I think is a must have for any homeowner is a voltage tester. And I'll show you why. So green means that there's no voltage. As soon as you touch a wire, it turns red. That's showing that there's voltage. So if I go ahead and kill this, so I just killed that. Now every time I touch this wire, it's going to stay green. Now if I put power back to this wire, it's going to go red. Like so.

Auto-generated from the video audio.