Skip to main content
Stesso

Label Fixture and Protect Wall Hardware

2:23
7:26
9K views

At 2:23 in

Steps preparing to paint a house. How to prep a house for exterior painting

Watch on YouTube

What happens here

Once the light fixture is fully removed, use a permanent marker and a piece of painter's tape to label the fixture with its exact original location (e.g., 'middle of garage'). This simple step prevents confusion during reinstallation. Additionally, cover any exposed mounting bolts or threads on the wall with painter's tape. This prevents paint from getting on the threads, which could make reinstallation difficult or damage the hardware.

Goal: Ensure proper reinstallation and protect mounting hardware

Tools and materials

  • Permanent Marker
  • Painter's Tape (Long-Release) Frog Tape

What they say

Hide

also going to take a piece of tape and i'm going to label this light exactly where it came from and i'm going to write on here that this is the um middle light of the garage right here wiring that's going to go right back on my ground wires now another thing we've got our bracket right here installed i like to take a little piece of tape and put it on the little bolt that sticks out so we don't get any paint on the thread so it doesn't make threading it a lot more difficult if your wire nuts aren't on tight i like to just take some tape and put it over the wire knot say if you got a single wire sometimes if you've got a single wire there's multiple wires here so the wire nuts will stay nice and tight you can take a single wire put the wire nut on there just like that we're going to move them kind of out of the way right there now i can paint around that light i'm going to label this right here where it came from now that i got my

Auto-generated from the video audio.