Skip to main content
Stesso

Spray Apply Sealant with Overspray Control

4:24
10:38
11K views

At 4:24 in

Staining A Fence | Expert Stain & Seal

Watch on YouTube

What happens here

Wear appropriate personal protective equipment, including a respirator mask and a full Tyvek suit, to protect your lungs from oil fumes and prevent stain from getting on your clothes or skin. The video demonstrates the primary application of the sealant using an airless sprayer. To control overspray, use a small tip (e.g., 515) and keep the sprayer's pressure low (around 500-600 PSI). When spraying a fence, angle the sprayer to hit the sides of the pickets rather than directly through the gaps to minimize overspray to the other side. A handheld cardboard shield can also be used to block overspray from passing through the fence or to direct the spray downward when working on the tops of pickets.

Tools and materials

  • Airless Sprayer

What they say

Hide

that I'm using an airless sprayer to apply the product now you can use I know guys that use up to you know 12 21 tips to just uh blast these fences super fast I like to use a really small tip cuz I like to control overspray there's no wind out today but you can still go extremely fast I like to use just a 515 tip it's going to put on a lot of product it's going to give product that you can back brush while you're applying it but it's really going to help you control overspray I turned the pressure down on my pump all the way down to um you know right around 5 600 PSI I don't have a gauge on my pump today that tells me exactly but I'm got it down to the the bare minimum pressure and that's just going to keep the the product from you know being pushed out into the air which it'll eventually carry in the air because it is an oil and it's really light so let's get ready we're going to you're going to see us staining this fence we're staining it black um expert stain and seal oil uh self-leveling non-drying penetrating oil let's get to work so I'm going to start getting ready to spray I'm going to be we're doing both sides of this fence I'm going to be controlling overspray going on the back side using a cardboard Shield right here that will limit you know the spray from um carrying from the backside now I typically spray at an angle so I don't get overspray shooting directly through um the fence this direction right here so I'll be spraying at an angle so I'm hitting the sides of the picket but limiting overspray going through the fence so it's going to look a little bit like this

Auto-generated from the video audio.