Apply Second Clear Lacquer Coat

Okay, door's all stained now. And the stain's been about 30 minutes to an hour now. We're going to start lacquering it with our spray lacquer. It's a good idea if you're doing this to use a mask, but in order to work and explain the video, I'm not using one. This lacquer is going to dry extremely fast and then we're going to go back over it and lightly sand it again. So, this step is extremely important when you're glazing a door and using a Sherwood glaze and which is a glaze is actually different than a stain or a gel stain to achieve the look. You've got to use a lacquer as your base coat. Once we're done spraying this lacquer, We're going to give it probably about a half hour to dry. Then we're going to sand it with a fine sanding sponge.