Prepare Measurement Setup

0:13

1:15

14.4K views

At 0:13 in

Spring angle

Watch on YouTube

What happens here

To measure the spring angle, acquire a framing square and position it on a flat surface, such as a workbench. One side of the framing square will represent the wall and the other side will represent the ceiling. Take a small sample piece of the crown molding and carefully place it into the inside corner of the framing square. Ensure that the top edge of the crown molding touches the 'ceiling' side of the square and the back edge touches the 'wall' side of the square, simulating its installed position.

Goal: Correctly position the crown molding sample for accurate spring angle measurement.

Tools and materials

Crown Molding Sample — The piece of crown molding whose spring angle is being measured
Framing Square — Creating a precise 90-degree reference corner representing the wall and ceiling

What they say

(607 characters)

Hide

the crown meets the wall is called the spring angle. A spring angle just determines how far out your crown molding is from the wall. Here's how you can measure spring angle. Get yourself a framing square. This is going to be your wall side and this is going to be your ceiling. Take a little sliver of crown molding and place it in your framing square as it would sit on the wall. Make sure that it touches your wall here and make sure that it touches your ceiling here. Get yourself an angle finder, place it on your wall, just bring it up till they both line up. As you can see, this crown is 38°. Now, if

Auto-generated from the video audio.