Apply Initial Spackling Coats

spackle so now we got everything you know cut out I'm going to start spackling you know this stuff your initial coat I SP right here I'm just going to be using my 2edge Flex knife 2in Flex knife to begin applying the Spackle I'm going to put on a heavy enough coat that have something to sand it's like that I filled it in pretty good I got a big gap behind this window but our Tower um sealant au1 will actually fill that Gap it'll fill the Gap but 2in crack I do also have a wide level five putty knife but need to level out something wide like this I do like um Crawford's interior exterior vinyl Spa over a lightweight spackle on something like this it's got more body it's denser it's a little bit denser a little bit harder we just got to fill in right here a little bit here this is a water-based product too so it cleans up with water easily so if I need to flatten out a large area I can just use my level five knife 4in knife here all right so I've got my initially initial spackling done we let this dry for several hours before we begin sanding it applying another coat if we need to apply another coat and um and then doing the cocking process all right