Skip to main content
Stesso

Complete Multi-Angle Spraying and Drying

5:48
10:18
23.5K views

At 5:48 in

Spraying Stucco Accents | Exterior Painting

Watch on YouTube

What happens here

After completing the initial vertical and downward passes, switch to spraying from sideways and upward angles. This is crucial for fully covering the complex, uneven texture of stucco, ensuring paint reaches all 'ins and outs, highs and lows, peaks and valleys.' The presenter demonstrates spraying the pillar and the side of the house from horizontal and upward angles. Allow each angled pass to dry before applying the next coat or switching angles, as the drying process often reveals missed spots. Continue to use the paint shield to protect areas not being painted, such as windows, or surfaces that will receive a different color and sheen (like the metal garage door or trim, which would get a satin finish).

Goal: Ensure full and consistent coverage by spraying from all remaining angles

Tools and materials

  • Ladder Little Giant A-Force300 — Accessing different heights for varied spray angles
  • Paint Shield — Protecting adjacent surfaces
  • Flat Paint Behr Dynasty — Painting the stucco

What they say

Hide

dries you end up seeing the stuff you [Music] missed my my gun is spraying in an upward angle right here so that when you're all this upper stuff is definitely going to have the other color showing through look looking down on [Music] it now I can shoot my second angle and then let it dry so I would but I wouldn't shoot more than one angle at a time so I'm going to shoot I went up and down and I'm going to shoot across looking down looking down here cuz the top of this didn't get shot from there so I'm going to shoot down the top of the diamond didn't get shot if I miss anything here you know I'm just gonna come across I'm going to shoot downward at my light you know the customer gets up here to change light bulbs they'd be looking down so you want to make sure you're spraying at a downward angle it's definitely more difficult um doing stucco if you're doing the same color to know where that you've gotten everything [Music] you can see those Stucker patches I did completely disappeared using cat 5 stucco patch this drip metal right here we're going to paint it the same color as the fascia so it doesn't matter to get o overspray on [Music] it usually what I do is I'll leave my sprayer set up all day with the stacco color you know keep coming back after it dries look at it at a different angle and shoot it again what you don't want to do is shoot your stucco once or twice and then clean your sprayer out and go to a different color cuz invariably throughout the day different lighting conditions you're going to see spots you missed so I'm going back just looking for anything light but I'm also shooting kind of like diagonally now um from this side I don't see any I think everything's covered extremely well just make it all random you don't want to shoot any consistent pattern yeah and that's

Auto-generated from the video audio.