Skip to main content
Stesso

Mount and Manipulate the Door

5:19
12:26
9.6K views

At 5:19 in

Spray Doors Easily With The PSDRID

Watch on YouTube

What happens here

The presenter demonstrates how to mount the prepared door onto the PSDID system. The door's feet rest on the central crossbar of the rotating base. One of the V-clips on the hinge side of the door slides onto the vertical side support. This setup allows the door to spin freely for full access during painting. He also shows how to use a specialized carrying handle that attaches to the V-clips, enabling easy movement of a wet door without touching it. The vertical support's height can be adjusted to align with the door's hinge height.

Tools and materials

  • Specialized carrying handle

What they say

Hide

standing it up on our device now I'll show you when the door's wet you got this handle this handle um this is go going right here it's going to switch around this is going to go in just like this so we got a way to hold it on this side we got a way to hold it on this side just take stick it in rotate it forward now you can lift the door up while it's wet and not actually touch it I'm going to get my height adjustment done right here and to slide this on tighten that and every Center hinge is going to be identical you're going to screw it into one of the screws in the center hinge the other screw will go right into the door so now the door sits on your stand spins freely you can spray both edges both sides spins both ways door comes on and off I can adjust my plastic up now if I want to cover my whole Center um my whole supporting post

Auto-generated from the video audio.