Apply Bondo Glazing Putty to Small Imperfections

it's going to put a dab of bundle glazing putty on you know a piece of cardboard anything could be a stir stick a piece of wood i like this cardboard right here because it's coated on the one side it doesn't cause the bondo to dry out so fast now i'm going to just begin filling my holes cracks seams with bondo glazing putty and then we'll let that dry it's probably going to take about 30 minutes for both these dry we'll sand it and then our spackled holes will be needed to be backed with one coat of bondo glazing putty and that's going to give you an amazing flat finish we're after the ultra flat factory finish on this wood so you've got to fill all this stuff that we see i'm using an inspection light right here one of the great things about an inspection light is it shows you all these nicks and dings with the naked eye if you didn't have an inspection light a lot of this stuff you're not even going to be able to see you can get these inspection lights we do have them on paint life supply co and you can take and mount it on a table you can i got it mounted on a one by three piece of trim right there so i can move it around the inspection light does tilt angles up and down to cast the light just the way you want it but i even got where my hinges left indentations gonna want to fill all that stuff so there it is the difference between using spackle which is softer bondo glazing putty which is harder don't confuse this with bondo itself this is bondo glazing putty which is what goes over the top of bondo if you're filling and doing large holes or large dents on automobiles bono glazing putty is absolutely amazing you can use it to get rid of brush strokes you could skim it over a door if there was brush strokes stipple marks uh microscopic nicks and dings seems stuff like that absolutely amazing so you got to have both of them if you're doing the professional looking amazing cabinet finishes if you got any tips or tricks you know that you use when it comes to finishing cabinets just leave it down in the comments section below don't forget if you enjoy our videos give us a thumbs up we really appreciate that it keeps encouraging us to keep making these videos to help you guys out you know in creating the ultimate cabinet finish like a pro and like we always say we'll see you