Assemble Solar Panels and Connect Wiring

tools. So, we're going to open everything up and get busy. By the way, all of this is plug and play, guys. Super simple. All you have to do is plug in and twist. And I'll show you that here in a second as I get everything together. I got both my solar panels put together. Super easy, super simple. About 5 minutes a piece. First one went a little slower than the second one till I learned. Um, barely had any parts left over. Just kidding, man. Uh, so this is the pump setup and this is the controller box. The controller box actually mounts under the solar panel. You got an onoff switch right here. Super simple. Everything just unscrews and is total plug and play. Okay. Very, very simple. Very, very simple. These are for switches. All you simply have is one that says sunlight and one that's for the pump. So, pump solar. Easy enough. That goes to your solar. Take your other two solar panels and connect them together. Super easy. Pop all this stuff out. The foil pump is in my It's in my It's in my hand. Just like that. Guys, this is the most simple way to power your solar offrid water system that there is. Plug and play. You don't even have to be able to read to do this, man. Okay, this is our pump. This is our pump cable. It's long. I think it's I don't know. The book might tell me how many feet long it is. So, the manual has all sorts of super easy pictures to look at. Uh, you can't get any better than that. There is an app that you can download for this critter, and it will connect via Bluetooth to the app. I already have the app on my phone. Super easy to download and there's plenty of uh little QR codes to scan to download that app. So, I think we're going to toss this in the water. Man, that's just all it is to it. Uh after we get our pipe hooked up real quick. I'm going to say that cables 100 feet. I don't Maybe it says it on here. That thing is long. Here we've got a barbed fitting on the end of our well pump that fits our one inch. So, we're going to slide our hose clamp over and and it even has it set up where you can just tighten it with your fingers. That's cool, too. Let's snug that dude down so it doesn't slip up the pipe about 5 miles and I have to go find it. This is 1 in. So, it's a 1 in outlet. And what we're going to do, we're just testing this today. Okay. Slide this dude in. Just like so. Snug it down. It's probably best that it has a wing nut cuz I'm a nut. And there we go. All right. I think I'm going to use some pliers on that real quick.…