Skip to main content
Stesso

Cut and Prepare Upright Wooden Posts

0:15
1:25
23.9K views

At 0:15 in

So much room for activities

Watch on YouTube

What happens here

First, use a miter saw to cut the wooden planks to the appropriate length for the upright posts that will slide into the trailer's stake pockets. Once cut, attempt to fit one of these planks into a stake pocket. As observed, the planks are slightly too wide, requiring them to be forced into the slots. The creator uses a hammer to demonstrate this initial fit, jokingly referring to it as 'one dose of Ozempic' to make it fit, and stating that 'nothing a good hammer can't fix.'

Goal: Cut wooden planks to size and modify them to fit the trailer's stake pockets.

Tools and materials

  • Hammer — Forcing the slightly oversized planks into the trailer's stake pockets
  • Miter Saw Ryobi — Cutting wooden planks to the desired length for the upright posts
  • Wooden Planks — The material being cut and prepared for upright posts

What they say

Hide

taller so that instead of taking two loads, I could take one load at once, save myself a whole lot of time all in a day's work. I am on video. So these are supposed to go into these slots. However, these are about 3/16 too wide. Let's see if we can put them on in a little bit of GLP-1s and see what happens. All right, let's see. One dose of Ozempic. Perfect. Oh, this one's a little tighter. Nothing a little hammer can't

Auto-generated from the video audio.