Skip to main content
Stesso

Rip Side and Divider Plywood

0:05
0:45
34.2K views

At 0:05 in

Sick of the mess? Organize your caulk and paints 👍 #diy #woodworking #carpentry

Watch on YouTube

What happens here

Next, prepare the plywood for the organizer's side panels and internal dividers. First, take a piece of 1/4-inch thick plywood and rip it on the table saw to a width of 3 1/4 inches. Following this, take a piece of 1/2-inch thick plywood and also rip it to the same width of 3 1/4 inches. These strips will form the long sides and the internal compartmental dividers of the organizer.

Goal: Create strips of plywood for the organizer's sides and dividers.

Tools and materials

  • 1/2 inch Plywood — For side panels or thicker dividers
  • 1/4 inch Plywood — For side panels or thinner dividers
  • DeWalt Table Saw DeWalt — To rip plywood to specific widths for the sides and dividers

What they say

Hide

Cut two 3-in pieces for the sides. Rip 3 and 1/4 quarter-inch plywood. Rip 1/2-in ply 3 and 1/4. Now that you have your dados, make a center mark on this slot. Now assemble.

Auto-generated from the video audio.