Loading Paint into the Roller

going to pull more of the lint off all right now we're going to assemble our wagner smart roller so the head of this goes you've got two um devices right here that's um are basically like spring loaded this thing's gonna just snap right in place right there and now our heads on paint roller slides on it's got a thumb lever right here that locks it into place to release it push it so now it's attached on there ready to roll i would assume our lubrication is for right here so it slides you know well if it starts to um gum up or not run very well all right so our lubrication this is petroleum jelly if you just check your instructions out there is a whole lubricating process when it comes to the roller uh eight steps to lubricating the roller including the o-rings on it so the o-rings are pretty important to keep the paint sealed inside the roller so here we go you can pull this lever it says to pull it out and it's not coming out so let me see okay squeeze trigger that's loose so make sure that's tightened something's locking it in place okay that's not working so well why is it sliding now and it wasn't sliding before okay it's locked in place all right start all over again squeeze trigger i guess you don't squeeze the trigger unlocks it okay here we go we're drawing our paint up um it's not doing so well drawing the paint up our smart roller is not so smart okay let me see is it don't know why smarty pants is not pulling up paint so well probably could have had half the hallway painted by the time i get pain in this thing hmm okay look at that go okay i think something like i tightened everything up and i think there might have been an air leak somewhere so this is a good like shoulder workout here okay now all you got to do is pull this off and i'm ready to go now i got to do is pull the trigger all right we're going to attempt to begin loading