Assemble the Dust Collection System

using your impact driver oh and while you still have your silicone or hot glue out go ahead and go over the entire wand on the inside and the outside to make sure there's no leaks look a good seal is gonna be a good operating unit remember the old handlebar that we removed yeah grab it measure the distance and holes at align them on the piece of wood use a Forstner bit to create inset holes to have established designated holes for the screws so at this point we threw the wood originally that we cut inside and then we're gonna we marked out where the holes are gonna be I mean they're five and thirteen sixteenths of an inch and then we're gonna mount it just like that I'm gonna screw it in so I think we're getting there I think we're really getting that all right let's assemble this magic maker take the bucket take the wood that we cut out drop it in use the to establish screw holes screw the holes in the bucket secured a place for everything is everything in its place so not actually make it work that right combination has to be in place the hose from the vacuum goes to the very top of the bucket then the host from the vortex on the side goes to the tool you're actually gonna suction only gonna work one way trust me I've already tried