Dry and Cure (Optional Second Coat)

What happens here

After applying the first coat of concrete sealer, allow it to dry completely according to the manufacturer's specific instructions, which typically range from 2-4 hours, or until it is dry to the touch. Once dry, inspect the surface. If desired, or if the manufacturer recommends, apply a second thin coat following the same application technique as the first coat. This can enhance durability, gloss, and UV protection. Ensure the area remains free from foot traffic, pets, or obstructions until the sealer is fully cured (which can take 24-48 hours or longer). (Note: This drying and curing phase is not depicted in the video.)

Goal: Allow the sealer to dry and cure, and apply a second coat if required for optimal protection.