Skip to main content
Stesso

Test for Leaks and Water Quality

0:45
1:20
4.8K views

At 0:45 in

Say Goodbye To Stinky Shower Water!💦 #plumbing #plumber #diy

Watch on YouTube

What happens here

With the filter installed, turn on the shower water and carefully check all connections for any leaks. Observe the water as it flows through the new filter. You may notice an immediate improvement in the water's smell if you previously had 'funky' water, or clearer water if you had visible particulates. The shower should now be ready for use, providing filtered water.

Goal: Confirm proper installation and initial performance of the filter.

Tools and materials

  • Water Household water supply — Testing the filter's functionality and checking for leaks

What they say

Hide

Teflon, this is you don't have to go more than three wraps with this. This is not even a 5-minute job. Now, let's fire this bad boy up. See what we got. Ain't got no leaks going on. It It does smell better. Our water was a little bit funky. When you need to change your filter, all you've got to do is take this part off right here. Swap out your filter every 6

Auto-generated from the video audio.