Skip to main content
Stesso

Test the Repair

0:53
1:00
1.3M views

At 0:53 in

Say Goodbye to Leaking Hose Bibs with This Hack #plumbing #tutorial #diy

Watch on YouTube

What happens here

Once the new vacuum breaker is securely installed, the final step is to test the repair. Turn on the water supply to the frost-free hose bib (typically by opening the valve with the green handle). Observe the newly installed vacuum breaker for any signs of leaks. The water should flow freely from the vacuum breaker when the hose bib is open, and there should be no drips, seepage, or spray from the connection point between the vacuum breaker and the hose bib itself. This confirms a successful, leak-free installation.

Goal: Verify the new vacuum breaker is installed correctly and not leaking.

Tools and materials

  • Water Municipal or well — Testing the hose bib and vacuum breaker for leaks

What they say

Hide

Comes with this little set screw. I don't ever actually put this on if you put this on and break it off It's gonna be really hard to take this off It actually comes with a washer that's gonna allow this to seal can just go hand tight with this And now we're good to go fast easy replacement in my neighbor's back in business

Auto-generated from the video audio.