Tack Weld Angled Supports to Base Plates
0:09
0:38
1K views
At 0:09 in
Save the $200 build your own fab table axle stands! I made mine out of all scrap metal!
What happens here
With the base plates and angled support pieces prepared, the next step involves positioning these angled pieces onto the square base plates. The video then provides close-up shots demonstrating the process of tack welding. Tack welds are small, intermittent weld beads used to temporarily hold metal components in their correct positions before a full, continuous weld is applied. This ensures accurate alignment and prevents movement or distortion during subsequent welding steps.
Goal: Securely tack weld the angled support pieces to the base plates for initial assembly.
Tools and materials
- Angled metal pieces — The components being welded to the base plates
- Clamps — Holding the metal pieces in place during tack welding, though not explicitly shown in use during the tacking sequence
- Metal plates — The base components to which the angled pieces are being welded
- Welding gloves — Protecting hands from heat, sparks, and sharp metal edges during welding
- Welding helmet — Protecting eyes and face from intense UV light, infrared radiation, and sparks during welding
- Welding machine — Performing tack welds to temporarily join metal components
- Welding rod/wire — Creating the tack welds