Skip to main content
Stesso

Sand the Edges and Cracks

0:10
0:31
8.9K views

At 0:10 in

Sanding gaps with Ekasilk 5mm course abrasive. #ekasand #deckprep #diy

Watch on YouTube

What happens here

With the detail sander selected and prepared, begin sanding the edges and cracks. Hold the sander firmly and carefully maneuver it to 'offset' the pad, allowing it to penetrate into the cracks between the wooden boards. Apply gentle, consistent pressure. The goal is to sand down any rough spots or 'fuzzy' areas on the edges, and inside the cracks where larger sanders cannot reach. Move the sander slowly and steadily along the length of the cracks and edges, ensuring an even finish. Periodically check the surface by touch to gauge the smoothness and determine if further sanding is needed.

Goal: Smooth rough edges and fuzzy areas within wood cracks.

Tools and materials

  • Detail Sander — Actively sanding the wooden surfaces
  • Dust Mask — Continued respiratory protection during sanding
  • Safety Glasses — Continued eye protection during sanding
  • Safety Gloves — Continued hand protection during sanding
  • Sanding Pad — The abrasive element used during sanding

What they say

Hide

so I can get down in the cracks and sand the edges they're kind of like a little bit rough and fuzzy trying to knock that down so I just offset it so I can stick it down in the crack.

Auto-generated from the video audio.