Final Inspection and Preparation for Finishing

yeah and um so you would use the echo diamonds because there are you guys sell the one inch like black sponges sponges I think sponges you're in a sponge so you wouldn't use that you would use the echo Diamond I use the economic I personally and this is a personal preference I prefer the half inch and the reason being is because it is so conformable in my hand I can do you know I do this all the time and when I when I tell people that is because I can get in there and I can use as much pressure or as little pressure as I need in my understanding too this is a rubber sponge right here this outside is rubber so if you're sanding like your Corners the edges it's not going to tear no well not tear and then you also you mentioned in the beginning um you don't like to use uh um I think it was conventional abrasives or you do use conventional abrasives on this you do you do use conventional and so and for those that um may not understand what the term conventional is so conventional abrasives are typically your film Tech and echostorm right right um and so these are not conventional prices anytime you apply like a sponge any type of sponge is not all you conventional braces are going to be belts paper discs cloth disk film disc you know sheets anything that actually has grain that stands promise right so I'm starting to really understand this stuff you know in detail now so there you have at the doors ready to blow off it's ready to do our seal coat and um ready to be finished and look like a factory finish