Install Decorative Slats and Integrate Recessed Lighting
At 0:02 in
River of lights 🤩 #deckdesign
What happens here
Begin the installation of the decorative slats. The video shows workers meticulously attaching numerous wooden or composite slats to the underside of the overhead structure using a cordless drill/driver and appropriate screws. The slats are of varying lengths and are arranged in a dynamic, non-uniform, and staggered pattern to create a visually appealing design. Measure and mark the placement of each slat carefully to achieve the desired aesthetic. It is implied that the slats are pre-cut to various lengths before installation begins. As the slats are installed, small recessed LED puck lights are integrated into the design by drilling holes into selected slats or the underlying structure and feeding wires through.
Goal: Create the decorative slatted ceiling pattern and embed the lighting fixtures.
Tools and materials
- Cordless Drill/Driver — Driving screws to attach the slats and drilling holes for lights
- Hole Saw — Drilling precise holes for the recessed lights
- Measuring Tape — Accurate measurement of slat placement and spacing
- Pencil — Marking cut lines and installation points
- Recessed LED Lights — Providing ambient lighting within the slatted ceiling
- Screws — Fastening the slats to the overhead structure
- Wire Strippers/Crimpers — Preparing and connecting electrical wires for the lights
- Wooden Slats — Creating the decorative ceiling pattern