Apply Proper Lubrication

valve bushing is already reinserted so do I need to clean that bushing or lubricate that bushing not the bushing itself what I usually do is I obviously want to clean all the overspray off the valve before you put that back on there and then I do sometimes put a little bit of lubrication on the front so that would be sometimes another spot to to put a little bit of Lube on if you're finding that you're getting a lot of overspray buildup on there you don't want to use regular oils or anything like that even on the outside of the gun because anything on your gun has risk of contamination and oils have Petroleum in it and petroleum with waterbase particularly is a big problem so uh always use acetone that's why I said acetone and I clean off the uh the valve stem with the acetone and then just a little bit of lubrication on there it'll ow the valve then to naturally slide Nic and freely through the bushing itself yeah I got to say you know um that's one