Apply Aqua Coat Grain Filler

uh it just says use this little squeegee or credit card or or bondo uh not a bond what do they call the uh putty knife and just start kind of basically squeegeeing into these pores what's cool is already here i'll bring the camera over you can see everything is turning white already the first coat is on it's uh it's already drying really well they're saying about 60 minutes to 45 to an hour is what you want to wait between coats it applies really easy with this little squeegee uh against the grain on the pores i was a little nervous about all these rounded over edges where they're grooved out that how am i going to get into that but then the directions that you can also use a towel or a rag and then apply it in a circular motion and it works really well so not bad at all um i'm gonna let it dry oh any excess stuff they say scrape it off so that's exactly what i'm doing so it's not caked on there i got a bunch of these doors to do so let's just turn on some tunes and get to [Music] work all right so it took me like maybe two hours to do all of these the first coat i'm now doing the second coat the second coat is actually a lot faster like this right here i just got it done in maybe like a couple of minutes mostly because you're kind of occluding any of the pores that are not white and not covered in white so kind of helps through the process by having a different color i'm gonna do one last quick uh pigment and then i'm gonna let it sit overnight uh that's what the directions say and then we'll start priming and painting so keep doing it all right guys we're looking really good i got uh all the doors done here um i got two coats of the aqua quote uh wood grain filler and sand it down to 220 right now they're ready for priming i got my water-based uh interior