Skip to main content

Quick Repair Of Smashed Garden Hose! #plumbing #helpingothers

0:45
199.4K views

Video by That Fix It Guy

That Fix It Guy

What happens here

This DIY project provides a simple and effective method to repair a damaged male end of a garden hose. It involves cutting off the old, worn section, softening the hose end with heat, inserting a new barbed fitting, and then securing it with a clamp to create a functional and leak-free connection.

Transcript

Hide

So this is the male side of the garden hose. Alright, we're going to make a quick repair. Chop it off. Get this unscrewed. Now we've got to put this piece right here in here. You had a heat gun, you could do that. If not, just boil some water. Just hold your hose in the hot water real quick and you'll see it's going to start getting real pliable. Take this bad boy, pepper right on in there. Took it and pushed it down on here a little bit. Got it the rest of the way on. It's right here, says fitting. Got a little arrow. This little bell inside. Gonna pop right on there. Get that bad boy pushed right up there on it. And then I just like to tighten them kind of evenly. Little there, little there. Alright, so we went from that to that.

Auto-generated from the video audio.