Apply Stain to Wooden Lumber
At 0:03 in
Pre-staining the lumber before cut and install. New construction painter. #newhomes #woodstain
What happens here
Begin the pre-staining process by carefully positioning the wooden lumber, such as beams or decorative corbels, on stable supports like sawhorses. Ensure that the wood surfaces are clean and free from any dust or debris. Dip a suitable paintbrush into the chosen stain and sealant, allowing any excess product to drip back into the bucket to avoid drips and waste. Systematically apply the stain evenly along all visible surfaces of the wooden pieces, making sure to achieve thorough and consistent coverage. The video features the use of 'Expert Stain & Seal' a self-leveling, non-drying oil-based product, which is notable for its ability to be applied in a wide range of temperatures, including cold conditions as low as 39°F (approximately 4°C). This pre-staining technique helps ensure full protection and aesthetic appeal before the lumber is installed, simplifying the overall construction process.
Goal: Thoroughly stain wooden lumber before installation
Tools and materials
- Bucket — Holding the stain and allowing excess to drip off the paintbrush
- Expert Stain & Seal — Protecting and coloring the wooden lumber
- Gloves — Protecting hands from stain
- Paintbrush — Applying the stain evenly to the wooden surfaces
- Sawhorses — Supporting the lumber during the staining process
- Wooden Lumber — The material being stained, specifically mentioned as decorative corbels
What they say
(404 characters)Hide
What they say
(404 characters)Auto-generated from the video audio.