Demonstrate Makita Impact Driver Performance
At 0:00 in
Powerful Comparison: Makita vs. Bosch Impact Driver
What happens here
To begin the impact driver demonstration, prepare a suitable wooden workpiece, such as a sturdy 2x4 lumber or a section of decking board. Ensure the workpiece is stable on a workbench or surface. Partially insert several different types of screws (e.g., coarse thread deck screws, lag screws, or construction screws) into the wood, leaving enough thread exposed for the impact driver to engage. Introduce the Makita XDT19 18V Impact Driver, noting its specifications: a maximum of 3800 Impacts Per Minute (IPM) and a maximum torque of 1590 inch-pounds (in-lbs). Select an appropriate impact-rated driver bit for the screws being used and insert it into the impact driver's chuck. Securely hold the impact driver and drive each partially inserted screw fully into the wooden workpiece. Observe the speed and smoothness with which the Makita impact driver sinks the fasteners.
Goal: Demonstrate the driving capability of the Makita XDT19 impact driver.
Tools and materials
- 18V Lithium-Ion Battery Makita — Powering the Makita impact driver
- Impact-Rated Driver Bit — Connecting the impact driver to the screws for driving
- Makita XDT19 18V Impact Driver Makita — Driving screws into the wooden workpiece for performance demonstration
- Various Screws — Fasteners to be driven by the impact driver for performance evaluation
- Wooden Workpiece — The material into which screws will be driven for testing and demonstration