Skip to main content
Stesso

Safe Nozzle Changing Practices

6:20
9:55
9.6K views

At 6:20 in

Power washing Tutorial. Easy Steps For The Newbie.

Watch on YouTube

What happens here

When changing nozzles, always ensure the spray gun is pointed towards the ground or a soft surface. Crucially, before attaching or detaching any nozzle, squeeze the trigger to release any pressure in the line. This prevents the nozzle from being launched as a dangerous projectile if it's not fully engaged or if there's residual pressure. Never point the nozzle at anyone or at a surface where it could cause damage.

Goal: Always point the spray gun nozzle downwards and relieve pressure before changing tips to prevent accidental discharge or projectile hazards.

Tools and materials

  • Pressure Washer Nozzles
  • Spray Gun

What they say

Hide

choke it got to turn it to on position for it to start flip it off there so you can see it struggled there was still some air in the line you just got to run all that air otherwise it's just going to take a while for it to purge itself out now a few other tips when it comes to the pressure washer if you're going to be switching nozzles at all this is extremely important put a nozzle on and never keep your fingers in front of the tip itself but when you go to pull this trigger there's any pressure behind it make sure you're not pointing the nozzle in the air because it's going to launch that thing if it's not fully engaged and

Auto-generated from the video audio.