Skip to main content
Stesso

Pull Start the Pressure Washer

4:51
9:55
9.6K views

At 4:51 in

Power washing Tutorial. Easy Steps For The Newbie.

Watch on YouTube

What happens here

To make pull-starting easier, first, squeeze the spray gun's trigger to release any residual pressure in the pump. This reduces resistance on the pull cord. While still holding the trigger, firmly pull the starter cord to ignite the engine. Once the engine starts, immediately turn the choke off (to the 'run' position). The engine should then run smoothly. If the engine struggles or sounds like it's cycling, it may indicate remaining air in the line.

Goal: Successfully start the pressure washer engine.

Tools and materials

  • Pressure Washer Mi-T-M
  • Spray Gun

What they say

Hide

very simple and easy to use now this one it's got a pull start on it simple trick when it comes to pull starting squeeze your trigger if there's any pressure behind the pump it's going to be really hard to pull the pull start so I'm going to take pull the trigger and then I'm going to pull start it while the trigger is um engaged right here and water squirting out of it just like this here and once you get it kicked over it's on choke you're gonna have to turn it off of Choke and then it'll start running you're gonna see right there it's not um initially spinning and turning because there's air air still inside the pressure washer didn't run it enough to purge all the air out don't worry it'll eventually just Purge itself out so once again I'm gonna pull my trigger release release the pressure it's been running for a second I might not have to choke it again we'll try one pole it didn't start so I'm just going to choke it got to turn it to on position for it to start

Auto-generated from the video audio.