Skip to main content

¡Pinta puertas con pistola como un profesional! Acabado liso sin ni una sola gota.

4:12
2.4K views

Video by The Idaho Painter

The Idaho Painter

What happens here

This project details the process of achieving a smooth, uniform finish on a door using an airless paint sprayer. It covers initial setup, specific spraying techniques including gun angle and overlap, handling edges, and considerations for different paint types and their drying characteristics. The goal is to produce a factory-like finish.

Transcript

Hide

Okay, here we go. I'm going to start spraying. see it has a great finish, beautiful all over the door. Now, when I was spraying this, your first pass, when you overlap 50%, that first pass won't have two passes on top. So I did the first pass twice. It had this angle as a 45º angle. I know that when I went straight down, it didn't cover as well as I thought. So I slightly rotated the gun so that it was pointing at a 45-degree angle. It's very subtle, very light. And then when I came here I changed it slightly so that it pointed at that 45g angle. Furthermore, when I went to the opposite side, I did exactly the same thing. When I reach the extremes, I go towards the end, I come out and blur it a little. I come this way, I just blur it a little. See? I have gone too far. I have excessive spraying on both sides. One thing, you know? They are exterior paints. Some will say they are exterior paints with an eggshell finish, when you paint them they appear to have an eggshell finish and then they dry and level out over time. Exterior paints don't give you a finish, a vitreous finish like interior enamels. They behave and are applied differently. a color like this thick, with a lot of dye to create this color. The paint doesn't atomize well with light colors, so you won't get a super smooth finish, but it will level out very, very well. I look at it and it seems to be covered, you know? 100%. If you think it needs two coats, one or two, you can give it another coat after it dries. It will take about an hour to dry. Give it another pass, then remove the tape and you're done. It's 100% covered. It looks pretty good to me . I have a uniform and pleasant finish across the entire surface. When I look right here on the entire door, I look for something that doesn't match, that has the same finish all over the door. Or there's something that feels light, like a kind of dry feather, because I went too fast, right? I did not overlap by 50%. I looked at it, I can't see it with this lighting. I have to switch to this lighting to really see it because I get a reflection and a glare that comes through the window. I can see it 100% from top to bottom. It has the exact same finish from top to bottom. It's ready to use and will dry and look amazing. So there you have it, like Rocío, you know, a difficult door on the outside of a new house. Goes.

Auto-generated from the video audio.