Caulk Tile Backsplash and Wooden Cabinets

10:47

19:36

674.3K views

At 10:47 in

PERFECT lines with caulking and tape.

Watch on YouTube

What happens here

In a laundry room setting, apply clear paintable caulk along the edges of a tiled backsplash where it meets the wall. Ensure the tile grout lines are masked off with Frog Tape to protect them. The clear caulk, being thinner, will penetrate into the pores of the grout, creating a sealed and seamless look when dry and painted over. Apply a bead of clear caulk along the junction of the wooden cabinets and the wall, again where Frog Tape has been used. The clear caulk will seal this line, and when dry, it will be invisible, allowing the wood grain to show through without a distracting white caulk line. Wipe any excess caulk off the tape and surrounding areas as you go. Use a soft touch when applying paint over the caulk to avoid digging the brush bristles into the wet caulk and pulling it away from the seam.

Goal: Create clean lines on tile and wood surfaces using clear caulk.

Tools and materials

4-inch Roller — Covering the stippling from the brush application
Caulking Gun — Applying caulk
Clear Paintable Latex Caulk — Sealing edges on tile backsplash and wooden cabinets
Frog Tape Frog Tape — Masking off the edges of the tile and cabinets
Gloves Kirkland — Protecting hands and wiping excess caulk
Paint Brush — Applying paint over the caulk
Paint — Painting over the caulked lines

What they say

(1,640 characters)

Hide

then I got a nice crisp clean line. So, here's a situation where we're going to use clear caulking instead. And so, we've got Frog Tape down to give us a little bit of an extra insurance on it. Um, on this this uh tile backsplash will actually mask back off the grout. The nice part about this is that clear caulking is going to go into all those pores, fill it all in. We'll paint it, pull it, and then it'll dry clear everywhere where it leaked through that tape or pores. And then again, right here, we've got wood where we're going to put that clear caulking in there. It's going to seal that line up and then when it dries, you won't see, like Chris had referred to earlier, that dam show up being white. It'll dry out clear. And so all you'll see is the gray color and then the wood. So here we go. And the clear caulking is a lot thinner and goes a lot further. So, usually I'll do about 60% of what I need to caulk and I'll drag all that excess on down. Then fill in as needed. And what's important with the when you're doing this method is you don't want to dig in with your bristles. So you're going to pull all that caulking away. So, you want kind of a nice soft touch and to pull your bristles down instead of in We'll cover over the stippling with our 4-in roller. And you don't want that roller to hit the edge of the tape or it's going to dig that caulk in. We'll pull off. And then like Chris said, you want to go slowly. And then we always pull towards where we're going instead of away. And that also is going to help that paint and caulking from not flipping back. We're going to be left with a nice crisp straight line.

Auto-generated from the video audio.