Sand Raised Fibers and Apply Additional Primer (if needed)

bit cuz there's so much exposed fiber and they're going to stand up what I'm going to do is just hit it with a sanding block it'll knock that down really fast if I have a lot to do I can just use my 3x4 sand or if you just paint over that without knocking them down you'll definitely see a difference in texture look how thick this stuff is so it hangs super well doesn't run in order to enhance penetration enhance adhesion you have to back brush it or you have to back roll it now you can do multiple coats if it's really bad like this right here I'm going to sand it I'm going to put another coat and then we're going to put two coats of paint over that you don't want to do you don't want