Apply First Coat of Primer by Brushing

viscosity product that's going to hang well and glue this stuff all back together the other thing it does is it Smooths the rough surface out it feathers edges out of like peeling paint if you got peeling paint you can spray it you can brush it you can roll it we found that brushing it is the best way to apply it and you want to get it underneath all these laps so all these laps they're all open and need to be glued back together also you know if you're working on a house like this you got to bid it correctly cuz this is timec consuming doing this if you own a home this is one of the reasons why you want to paint you know when you should be painting your house somewhere between 9 and 12 years you should be repainting if you allow it to get like this it's just going to cost you $2 to $33,000 more to repaint your house this is a product I've been using for years now quite a few years typically almost every house up here in Idaho I'm going to use you know either a half gallon to a gallon this this whole side's going to take several gallons so this is how it's applied we're just using I'm using a chinex filament brush my go-to brush when I'm using when I'm using Peel Stop is just a 3 and 1/2 in and angled sash brush gives me the ability to get underneath the laps really easy you want to make sure you're brushing everything so anything that's blistered anything that's open this is probably one of the worst that I've ever done before right here over here we're down down just almost a just pure cardboard right here it's going to be rough kind of like sandpaper a little bit cuz there's so much exposed fiber