Skip to main content

Install the Protective Liner

3:20
13:48
5.1K views

At 3:20 in

Paintline Paint & Spray Booth XL

What happens here

Carefully drape the plastic liner over the assembled frame, starting from a designated 'begin here' corner (typically the lower right). Patiently work the liner around the frame, gently sliding it over the poles and securing it with the previously installed clips. Take your time to avoid ripping the plastic. The booth itself serves as a crucial protective cover, containing overspray and protecting the surrounding environment from paint contaminants.

Tools and materials

  • Liner Clips

What they say

Hide

and it says begin setup right here so looking at the booth right here it tells you first tab begin here this is the lower right corner right here so this is the first Corner that's going to be installed then I'm going to be working my way around the booth this direction going to extend it down to this clip right here just take your time be patient Glide it on you don't want to rip this going to stick that on just want it about halfway down now I'm just going to move to my next [Music] connection don't worry about getting it slid all the way down your connection points until you get all the way around then we'll begin working it [Applause] down this go now I'm going to start working it slowly down my poles just work you about a foot at a

Auto-generated from the video audio.