Painting walls FAST with the inner feed paint roller. A look at my roller set up. #paintroller

So I'm going to show you my setup today. I'm getting ready to roll some walls in a commercial building some use in Interfeed roller right here hooked up to my tri-tech T4 I've got an inline gun right here. I like using an inline gun. I've got an exit flex Z-swivel right here. It's a 360-degree Z-swivel attached to my whip So Z-swivel attached to the whip is going to make your gun a lot more maneuverable It's going to cause less shoulder fatigue arm fatigue wrist fatigue. It's going to make your rolling a lot easier It can be a lot faster using an inner feed roller. I'm just going to set this up I typically run it around 400 psi and it's continually feed and I can roll super fast with this setup I don't need an 18 inch because I'm continually feeding the roller the 9 inch roller I'm never dipping and rolling so that's my setup here we go. It's rolls walls