Load Sprayer and Apply First Coat

thing up and start spraying all right we got one of the things we're working on is this is a shelf right here kind of like a Sho rack type shelf we're getting the initial sand done it we're using our 3x4 sander using three 20 grit um film Tech right here for our flat surfaces then we're also using a 10 mm very fine sponge to hit the rounded surfaces and edges right here I do got a spot there's um this is a wood piece of um furniture and there was a piece of oil or grease if I ever run into any type of contamination issues fishee issues I'm typically going to be using a uh spray can of bomb of Ben 123 so I'm just going to spray that get that that nice and coated that little oil spot right there all right we're getting done with our uh first coat just about and this is going to be our seal coat it's going to dry in about 45 minutes to an hour we'll be able to sand it and then hit it again just depending on how it feels um the build on the product um being barewood I think we'll probably hit three coats on this dry time's extremely fast so your recat and sand time is extremely fast we'll be able to get three coats on this thing pretty quick but we're going to keep finishing this up and we'll start on of