Apply First Coat of Polyurethane

coat just about and this is going to be our seal coat it's going to dry in about 45 minutes to an hour we'll be able to sand it and then hit it again just depending on how it feels um the build on the product um being barewood I think we'll probably hit three coats on this dry time's extremely fast so your recat and sand time is extremely fast we'll be able to get three coats on this thing pretty quick but we're going to keep finishing this up and we'll start on of the sanding and second coat all right now we we're working on we're letting one piece of furniture dry we're going to be working on this other piece of furniture I've done some initial sanding on it it's kind of a rustic looking piece of furniture it's got a lot of um initially when it's made they hid it banged it up and stuff kind of gave a rustic look to it but there are some nail holes in it where they nailed things together they just wanted to eliminate um a few of those things so I filled it with Bondo glazing putty now we're just going to go around sanding it with our 3x4 sander and then this one's want to be ready for the first coat of [Music] paint all right so we're waiting for once again one piece of furniture to dry we're working on this other piece we've got did some bondoing on here get rid of some Nix and dings on this piece of furniture might uh a little bit of a seam right here to get rid of that seam this is kind of a piece of plastic that's um nailed on the face of that uh particle board right there to give it a nice Edge to it and um it might be good to it but we we're working on vacuuming it we just got a a shop vac right here a little Bosch a battery operated shop vac makes it nice and convenient you want to shop back get all the dust off before you take it into the spray booth we're going to shop back it then we're going to blow it off with our blower right here blower tool to get any dust off we want a completely dust free piece of furniture before we spray on our first coat all right it's been about 45 minutes to an hour we're starting to sand do our first sand after our first seal coat and then we're going to shoot another coat on there it's on there pretty heavy sanding pretty well feels pretty smooth and then we're going to get ready to shoot the second coat I'm using an a very fine Echo silk 10 mm sponge to do the sanding that I'm doing right now doing film Tech on the flats is grabbing a little bit too much and being a little bit too aggressive so I just switched to…